Beautiful Design Sandwich Panel House Container Office Fast
Assembly And Recyclable
I. Product Introduction
Building an office house with sandwich panel containers is one of
the new ideas. It is green, time-saving, labor-saving, very
flexible, and changeable. Compared with traditional housing, it can
provide more choices for residents. Individuals, families and even
a community can get what they need.
The structure of the container house is the overall structure or
assembly structure, but its integrity is relatively strong. It
divides the house into a small unit, which is basically the size to
assemble into how many large houses. The installation process is to
assemble the base frame first, then the whole house frame, and then
assemble the wall and ceiling; then lay the floor, install the
water and electricity for the doors and windows, etc.
II. Product description
This sandwich panel container office house is designed very
beautifully with luxury appearance.
It is more suitable for sites such as oil sites, drilling
companies, and factories' offices.
It is a two-story container office with a side of glass walls. The
reception room, kitchen, meeting room and manager office are on the
ground floor. There also two toilets for ladies' and men.
One the first floor, there is the open office hall, a manager's
office, and a toilet room with a shower, sitting toilet, and
washbasin. Outside is a platform with 36 square meters, for people to enjoy themselves.
Layout information
| 1 | Building area | 180 sqm | | 2 | Land area | 92 sqm | | 3 | Capacity | 20 people |
III. Product show
III. Main Specification
| Part 1: Roof System (roof plate + roof purlin + roof insulation +
ceiling) | | I | Roof Plate | Roof tile is 0.5 mm thick steel sheet; Pre-coated and color coated; | | Strong and corrosion resistance. | | ii | Roof Purlin | 1pc 40x80mm Galvanized Square tube + 2pcs 40x60mm Galvanized Square
tube + 5pcs 40x80mm Galvanized Square tube; | | Firm, strong corrosion resistance and has a long service life. | | Part 2: Steel Frame (Corner post + column + beam + bolt) | | I | Corner Connection Part | Material: 4 mm Thickness Shaped Steel, surface spray treated by
machine after repeatedly polished; | | Size: 160* 160* 160 mm (Bottom) &160* 160* 180 mm (Top); | | Feather: Safe, strong, and corrosion resistance. | | The color is glossy and can last for a long time. | | ii | Column | Material: 2.3mm Thickness galvanized steel structure, surface spray
treated by machine after repeatedly polished; | | Size: 160* 160* 2480mm; | | Feather: Safe, strong, and corrosion resistance. | | The color is glossy and can last for a long time. | | iii | Top and Floor Long Beam | Material: 2.3mm Thickness galvanized steel structure, surface spray
treated by machine after repeatedly polished; | | Size 1: 3680* 60* 160 mm; | | Size 2: 5680* 60* 160 mm; | | Feather: Safe, strong, and corrosion resistance. The color is
glossy and can last for a long time. | | iv | Top & Floor Short Beam | Material: 2.3mm Thickness galvanized steel structure, surface spray
treated by machine after repeatedly polished; | | Size 1: 2680* 60* 160 mm; | | Feather: Safe, strong, and corrosion resistance. | | The color is glossy and can last for a long time. |
|
