Fast build Prefabricated sandwich panel house with modular design
and low cost
I. Introduction
This T type prefab house is the most economical and applicable for
small and medium-sized temporary accommodation, office buildings,
and schools. Its layout can very flexible.
It is the best choice for temporary and emergency because this
buildings with the longest history and the widest distribution
which have been used for 40 years.
After 15 technical improvements, the products have been widely
distributed in all parts of the country and nearly 100 countries
and regions around the world.
It is also one of the fastest temporary buildings that can be
installed, with 4 people a day and 130 ㎡. A 40-foot container can
carry about 330 ㎡.
II. Design description
| 1 | Unit house area | 63 sqm | | 2 | Capacity | 2-4 people | | 3 | Floor number | 1 | | 4 | Bedroom qty. | 2 | | 5 | Toilet qty. | 1 | | 6 | Kitchen room | 1 | | 7 | Living room | 1 |
III. Main material specification
| Part 1:Roof System | | Roof Panel | 50mm rock wool sandwich panel; | | Color is common color: scarlet/blue | | Herringbone | Galvanized square tube: 40*80*1.4mm; | | Firm, strong corrosion resistance and has a long service life | | Roof Purlin | Galvanized square tube: 40*60*1.4mm; | | Strong, durable, corrosion resistance and has a long service life. | | Ring Beam | Galvanized square tube: 40*60*1.4mm; | | Firm, strong corrosion resistance and has a long service life | | Ceiling | Steel plate ceiling | | Strong and corrosion resistance | | Part 2:Steel Frame (Bottom Steel Structure+Column+Bolt ) | | Bottom Steel Structure | 1. Foot support: 40mm(Width)*80mm(Length) | | 2. Bottom purlin: 40mm(Width)*80mm(Height) | | Column | Galvanized square tube: 80*80*2.0mm; | | Safe, strong and corrosion resistance, | | The color is glossy and can last for a long time. | | Bolt | High strength galvanized steel bolt | | Firm, strong and corrosion resistance | | Part 3: Wall Panel | | Wall Panel | 50mm rock wool sandwich panel,( 0.38mm steel plate on both sides); | | Color is a common color: white grey. |
About OEM
______________________________________________________________________
If you want to customize a container house, we need the below
details:
1. Dimension: Length, width, height, eave height, roof pitch, etc.
2. Doors and windows: Dimension, quantity, material
3. Local climate: Wind speed, snow load, etc.
4. Insulation material: EPS, PU, rock wool, glass wool.
5. Are there any materials that are not allowed to import into the
country where the structure is planning to use?
6. If you have other requirements, please also inform us.
7.It's better if you have your own drawings or pictures. Please
send them to us
|
